NURSE PANEL (SP 2020)

The nurse panel (SP) is placed on the nurse-in-charge working table and is intended for calls reception. This panel enables the call and paging room number recognition, and also establishes verbal communication with the patient.
There are two-row LCD, red and green LEDs, keyboard, two pushbuttons (Vol-,+) for volume control, pushbutton for making the conversation (SPEECH) and loudspeaker on the front face of nurse panel (SP). Also, there is one goose-neck microphone, and on the rear side are mounted two connectors (one for signal and other for speech communication).
On the front side of SP is positioned an keyboard, intended for room and bed numbering, and also for making and releasing of speech communication.
The room and bed numbering is doing in the phase of system installation. Entering the three-digit service code through the keyboard, service mode is accessed. The numbering process is as follows:
- make a page (call) from the room
- activate ESC button
- key in call number (four digit)
- depress ENTER to finish the operation
The nurse panel (SP) is equipped with supply unit. This unit is mounted in the plastic box, and located in the nurse panel (SP).

THE ROOM TERMINAL (STA 2002)

Room terminal (STA 2002) is mounted at 1.5 m above the floor near the door in the sick or other room. Box for mounting is integral part of element. This element consists of two parts: a microprocessor, which provides part of the communication signal to the nursing panel, and the audio part that provides voice communication is also the nurse panel.
All elements from the room are connected on the room terminal (SOS, PK, SSL and RS).
Provides the following features:

- nurses call
- call resetting
- voice communication

THE ROOM TERMINAL (ST2002A)

This terminal is mounted with mounting plastic box DZ 2000 and can be used as room terminal for separated toilets/bathrooms, or as call-reset combination for the common utilities.

It enables following functions:
- sister call
- call resetting

PULL (SOS) SWITCH (SOS 2000)

This is an pull switch mounted in the bathrooms/toilets approximately 2.1m above the floor. It uses an mounting plastic box (DZ 2000) for mounting.

It enables following functions:
- urgent call

PULL (SOS) SWITCH (SOS 2000)

This is an push switch mounted in the bathrooms/toilets approximately 0.8m above the floor. It uses an mounting plastic box (DZ 2000) for mounting.

It enables following functions:
- urgent call

THE ROOM SIGNAL LAMP (SSL 2002)

The SSL is two coloured lamp mounted above the patient entrance door.
The meaning of the colours are following:
- blinking red - urgent call
- steady red - common call
- blinking green - sister or doctor call
- steady green - sister presence

It enables following functions:
- visual presentation

BED PANEL (PP2010)

This bed panelis mounted in the hospital lighting, on the night table, in the wall or on the wall under the night table. It can be used for the musical programed selection and volume control. Listening is enabled by means of earphones or hearing tubes.

TERMINAL BOX WITH ELECTRONIC SWITCH (PT2001A)

This terminal box enables hand-set connection,parallel push-buttons for sister calling (paging),direct lightings,on/off switching,electronic set (EP) for the same function.It is mounted on the hospital lighting Al-channel or on the wall with appropriate mounting plastic box.

It enables following functions:
- hand-set connection
- on/off direct light switching
- sister calling

TERMINAL BOX (PT 2001A2)

It is mounted on the hospital lighting above the patient bed.It comprises hand-set connector (RS 2001), parallel sister call push-buttons and reading lighting on/off push-buttons.

It enables following functions:
- hand-set connection
- on/off direct light switching
- sister calling

TERMINAL BOX (PT 2002A)

This box is mounted in/on the wall above the night table near the patient bed. It is equipped with hand-set connector (RS 2002) and an parallel “sister call” push-button with indication. Terminal box uses an mounting plastic box DZ 2000 for fixing.

It enables following functions:
- hand-set connection
- sister calling

TERMINAL BOX (PT 2005A)

This terminal box contains only connector for nurse panel. It is mounted in an mounting plastic box (DZ 2000) or in an 60mm diameter hole in the sister panel mask.

It enables following functions:
- nurse panel connection

TERMINAL BOX (PT 2006A)

This box possesses only speech unit connector. This connector also transfers supply current for the GJ. It is mounted in the same manner as the PT 2005.

It enables following functions:
- speech connection

HAND SET(RS 2003)

It can be connected to the connecting terminal (PT 2001A,PT 2001A2) . It can be used for the remote nurse call. There is also one button for reading lamp on/off switching.

It enables following functions:
- reading lamp control
- nurse call

HAND SET (RS 2004)

It can be connected to the connecting terminal (PT 2002, PT 2004) and can be used for the remote nurse call.

It enables following functions:
- nurse call

EARPHONES AND HEARING TUBES

Listening to the musical programs is enabled with the hand-set (RS 2001 and RS 2002), but more sophisticated acceptance of this programs can be achieved with standard 3.5mm earphones or hearing tubes.

SUPPLY UNIT (NJ 2000)

This unit enables stabilized voltage (+12V) for all system elements. It is mounted in the sister panel or on the wall near the sister panel. There are two types of supply unit NJ 2000, one supplies 1.5A and the other supplies 3A of DC current. Choice of the supply unit depends on the number of room terminals in the system. The 1.5A type can supply max 10 room terminals, and the 3A type is capable of more rooms supplying. There is also an stand-by supply as an option in both cases.
NJ 2011-without the stand-by supply
NJ 2012-with the stand-by supply, that lasts 30 minutes